How to Avoid Thread Issues With Your Embroidery Machine, embroidery machines

Most of these threads work well on most of our devices, but because our tools turn to computers, and their mechanisms are more and more hidden, it can be disappointing and cause problems when our threads are often broken Especially when we try to squeeze the gift in the last the moment or sew the final details on a wool jacket. Steps to solving problems with page breaks: janome mc14000 sewing & embroidery machines


Thread the needle again.


When the needle thread breaks, the first thing to check is the thread path. Remember to cut the thread by buffering before going through the stretching disk and draw a broken thread across the machine from the end of the needle. Do not pull the thread back through the drive towards the spool, which can eventually damage important parts, require costly repairs. Then spit out the sputum and re-thread the needle according to the instructions for threading the machine. brother innov bp2100 embroidery machine


Change your needle.


Even if the needle in the device is new, the needles may have small bumps or blemishes that break the thread. Make sure that the needle also has the right size and type of thread. If the eye of the needle is very small, the string can be shed faster, which results in a more sporadic relief. The small needle also makes small holes in the fabric, which results in greater friction between the thread and the fabric. Needles and metal needles are designed for a special thread and save them from excessive stress. To get torn again, try a new needle, a large needle, a special needle or a large needle. brother innov bp3500 embroidery machine



Reduce the needle tension and sewing speed.


This can help to reduce stress and low speed, especially in the case of long snow seams, metal or monofilament yarns, and high-density patterns. Sometimes it may be necessary to reduce the stress associated with the needle more than once.


Check the thread path.


This is especially valuable in the case of problems with Serge. Make sure the threads follow an easy way to buffer for buffering or disks and even needles. The thread could at some point jump from the right path that you can not see or not. The perpetrator is often a hand. If you re-weed, this problem will be resolved. There are several places where you can find the topic. Some threads around the buffer pin may drop from the buffer and spin. If there are other threads nearby, you can combine them with a stitching thread. brother innov bp1400e embroidery machine